Model
Q3512
Q3525
Q365C
Q3610
Q3620
size of cleaning workpiece
(mm)
600*250*250
1000*500*250
2500*1300
2500*1500*280
4000*3000*700
Maximum weight of workpiece
(kg)
400
1000
5000
10000
20000
Shot blasting amount
(kg/min)
200
2*250
2*250
4*250
4*250
Lifting amount of hoist
(t/h)
15
30
40
60
75
Separation amount of separator
(t/h)
350
150
40
60
75
Ventilation
(m3/h)
2400
6200
13200
240000
21000
Power
(kw)
17.3
35.2
39.2
188.45
185.25
Dimensions
(mm)
1500*3450*3780
2200*3500*4300
9000*4200*9290
14900*500*8700
16900*6540*10020
By the rotary table as the workpiece carrying device, according to the diameter of the rotary table can be divided into φ1200 mm, φ1600 mm, φ1800 mm, φ2500 mm, etc.. This kind of cleaning machine some with a blast machine, some with two or more blast machine, and some continuous work, some intermittent work, depending on their needs. Its working principle is: the workpiece is placed on the turntable (distance between the workpiece, no contact, no collision), the turntable with the workpiece into the blast area and blast cleaning, when the turn to put the position, the workpiece can be removed. Therefore, this type is most suitable for workpieces that do not need to be cleaned on one side, otherwise the workpiece should be turned over and cleaned again. However, this type of machine has a turntable and a hook, and the hook has a rotating function. So it is suitable for all kinds of demanding workpiece surface treatment.
Translated with www.DeepL.com/Translator (free version)
1. The design of the blasting machine is customized according to the blasting requirements and productivity of the workpiece.
2. The layout of the shot blasting chamber and shot blasting machine are determined by the computer after three-dimensional dynamic blasting simulation
3. The use of wind / magnetic separation of shot and slag separator, thorough separation of projectiles and dust.
4. The cart has the function of walking and indoor rotation
5. The machine has automatic fault detection device, so that the machine has advanced structure and reasonable design, reliable operation, high production efficiency, etc.
6. According to the size of different workpieces, decide the number of open shot blasting machine
7. The equipment is designed without dust pollution, all bearings are installed outside the blast chamber.
8. All protective plate fixings are installed outside the blast chamber, that is, easy to remove and replace also to ensure that the fixings are not subject to the loss of the blast stream.
