Model
Size of workpiece(mm)
Loading capacity of each hook(kg)
Abrasive flow rate(kg/min)
Dust air volume(m³/h)
Q376
Φ600×1200
600
2×110
5000
Q378
Φ800×1500
800
2×180
6500
Q3710
Φ1000×1800
1000
2×230
8000
Q3720
Φ1200×1800
2000
3×230
10000
Q3730
Φ1500×2200
3000
3×280
13000
Q3750
Φ2200×2200
5000
3×330
17000
Q37100
Φ2800×3500
10000
5×280
23000
The Q37 shot blasting machine is a hook-type shot blasting cleaning equipment with the following characteristics:
The cantilever (or direct connection, that is, the motor is directly embedded) centrifugal shot blasting device with large shot blasting volume and high shot speed is used to improve cleaning efficiency and obtain satisfactory cleaning quality:
Q376 uses Q034ZZI6 direct-coupled centrifugal shot blasting device;
Q378 uses Q034 cantilever centrifugal shot blasting device;
All drawings of the simulated projectile diagram and shot blasting machine are drawn by computer-aided design (CAD), and the selection and layout of the shot blasting device are more reasonable. The utilization rate of projectiles and labor productivity are improved, the cleaning effect is ensured, and the abrasion of the chamber body guard plate is reduced.
No pit. This not only saves the construction time and cost of the pit foundation, but also solves the problem of the pit-type shot blasting machine used by customers in southern China that the pit sand is corroded and agglomerated due to the water in the pit.
The electric hoist is used to suspend the workpiece, and the hook can lift, translate and rotate indoors. Q376EA, Q378E, QD378B adopt double hook form, and the hook has its own walking track, so there is no need to change the track when working.
[376] Shot blasting machine uses 0.5 ton electric hoist.
[378] The shot blasting machine uses a 1-ton electric hoist.
The cleaning room is protected by wear-resistant steel plates, and the dust removal method is bag dust removal. The electric control system has manual and automatic operation.
1. This series is divided into single hook type and double hook type. The double hook type is equipped with Y-shaped track. Shot blasting and loading and unloading of workpieces can be carried out separately.
2. During shot blasting, the workpiece can reciprocate back and forth while rotating to thoroughly clean the dead corners of the workpiece. ...
3. No pit, convenient workshop layout, saving infrastructure costs.