In the whole casting process, the reuse of old sand is indispensable. Regardless of whether it is the production cost or from the perspective of environmental protection, the recycling of old sand is the most important part in the casting process. Qingdao Sancasting Machine Equipment Manufacturing Co., Ltd. With the eleven years of the entire casting industry, a lot of industry experience has been accumulated. Sand is added to the glass by adding glass water, resin or clay to improve the thermal stability of the sand to ensure the quality of the casting. This is the first use of new sand. With the cooling molding of castings, the reuse of sand becomes the key. The indispensable part of this link is the regeneration machine; the regeneration machines independently developed by our company are divided into the following three categories: S33 series crusher, S52 series centrifugal regeneration machine, S56 Series vibrating regenerators, of which the S33 series crusher series integrates crushing, screening and initial regeneration as a whole, so here is also introduced; S56 series vibrating regenerators are mainly for the recycling of resin sand and water glass sand, Settling sand (with falling sand frame), crushing, demoulding, screening and other functions in one, compact structure, small footprint, the machine is powered by a vibration motor, the work is mainly rubbing, and the sand crushing rate is low , The recovery rate is high, and the regenerated sand particles are more complete, which has been affirmed and recognized by customers. Among them, the S52 series centrifugal regenerator is worthy of recommendation. This machine is a secondary regeneration mechanism. Wipe to achieve the purpose of removing the film and rounding the sand. At the same time, the old sand automatically forms a cushion for the machine basin in the regeneration basin to ensure that the regeneration basin is not worn. The external sand solid impact plate completes the secondary regeneration of the sand. The throttle plate is installed on the outside to effectively ensure the reliable regeneration of the sand, and the sand will not be broken during the regeneration process, and the sand particles have better roundness and more regularity. The reclaimed old sand can reduce the amount of liquid material added to reduce production. The lower part is equipped with a secondary air separation mechanism to discharge the inert film and dust in the reclaimed sand to achieve the reuse of sand; therefore, the reclaimer is the entire sand To deal with the important parts of the production line, at the same time, Qingdao Sancasting Machine Equipment Manufacturing Co., Ltd. can provide technical personnel on-site service to ensure that each station can operate normally, and conduct operation training at the same time. Welcome to visit the factory.

Qingdao Sanzhuji Equipment Manufacturing Co., Ltd. specializes in the production of sand reclamation equipment,foundry machines,Sand casting equipment,GS high efficiency rotary mixer,no-bake resin sand mixer,Jolt squeeze molding machine/Jolt-squeezing moulding machines,Multi- Piston Moulding Machine/Hydraulic multi-piston moulding machine,foundry molding machine,flaskless moulding machine,shot blasting machine,dust collector,according to the amount of old sand recovered Carry out plan customization, and provide sand reclamation equipment installation, commissioning, and training. Welcome guests to visit the factory.