Regulator for sand temperature of cooling bed_Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd

position: Home >> News >> Corporate news>>Regulator for sand temperature of cooling bed

Regulator for sand temperature of cooling bed

As the northern hemisphere enters summer, the rapid cooling of sand temperature during the casting process is an important part of old sand regeneration and reuse. The increase in natural constant temperature can no longer meet the rapid cooling of sand particles. At this time, the role of the cooling bed is highlighted. The cooling bed usually uses water-cooled cooling and high-pressure fan forced blast cooling to quickly cool the sand particles and then enter the regeneration stage; at present, there are more types of water-cooled cooling beds, and the range of water-cooled cooling beds is also the most widely used. Through the development in recent years, some cooling beds have combined water-cooled and high-pressure fan blast cooling to produce a water-cooled boiling cooling bed. Although the technology is difficult, the structure is complex, and the energy consumption is high, its cooling effect is good and meets The technological requirements have been respected by many casting customers; the S86 series boiling cooling bed and the S89 series water-cooling boiling cooling bed developed and produced by Qingdao Sanzhuji Equipment Manufacturing Co., Ltd. are both water-cooled and high-pressure fan blast cooling In the combined cooling bed, the high-pressure fan is used to vigorously blast the sand particles to a boiling state, and the cooling water or rain cooling is used to quickly cool the sand particles, thereby achieving the effect of rapid cooling;
Qingdao Sanzhuji Equipment Manufacturing Co., Ltd., it is recommended to pay attention to the following when using the cooling bed:
1. There is no material in the lower level of the sand hopper of the sand adjuster during operation, and the adjustment gate should not be opened (the same as manual and automatic).
2. Under normal circumstances, it is strictly forbidden to manually let the sand directly pass through the sand temperature regulator, otherwise the cooling water pipe will be worn out, causing a vicious accident of scrapping the cooling section of the entire drawer. Especially when the sand does not need to be cooled in winter, the management needs to be strengthened.
3. Regularly check the material level gauge to prevent the failure of the cooling water pipe.

If you want to get more sand processing equipment and use knowledge, welcome to visit the factory.

Qingdao Sanzhuji Equipment Manufacturing Co., Ltd. specializes in the production of sand reclamation equipment,foundry machines,Sand casting equipment,GS high efficiency rotary mixer,no-bake resin sand mixer,Jolt squeeze molding machine/Jolt-squeezing moulding machines,Multi- Piston Moulding Machine/Hydraulic multi-piston moulding machine,foundry molding machine,flaskless moulding machine,shot blasting machine,dust collector,according to the amount of old sand recovered Carry out plan customization, and provide sand reclamation equipment installation, commissioning, and training. Welcome guests to visit the factory.

Recommended products