S52 series centrifugal regeneration machine
mode
S524A
S528A
S5212A
Productivity（t/h）
5
10
15
Power(kw)
11
22
30
Strip ping of coating(％)
≥25％
Micro-grains content(％)
≤5％
Recycling use rate
≥90％
The machine adopts turbo regeneration
principle, the main use of the old rub between sand to achieve the objective of
the membrane and rounded off sand, sand at the same time in the regeneration of
basin forming on the machine automatically within its cushion layer, protect
the basin of regeneration from wear and tear, the solid sand flow impact panels
complete secondary regeneration of sand, build a lateral mounted to the
throttle plate and can effectively guarantee the reliable regeneration of the
sand, sand and wont be broken in the regeneration process, sand grain
roundness is better, more rules. The recycled sand can effectively reduce the
amount of liquid material added, and the lower part can be equipped with a secondary
air separation mechanism to discharge the inert film and dust in the recycled
sand.
The machine is a secondary regeneration
mechanism, the upper regeneration of the old sand automatically flow into the
next regenerating basin, secondary
After regeneration, the old sand flows into the air separator part.
