Corporate news_Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd

NEWS

19

2020-09

industrial environmental protection dust removal equipment

Different dust removal equipment can process different substances, mainly used to process solids, gases, and liquids, namely dust, harmful gas...
15

2020-09

Vertical parting injection molding line sand quality control and production appl...

Molding is the key process point of casting, molding sand quality directly affects the quality of casting, Sanzhuji combined with more than ten years of experience in ...
10

2020-09

How does the investment molding process reduce the cost

Compared with sand casting, investment casting has small input equipment and low production cost. It is especially suitable for casting of ...
05

2020-09

Precision casting is also called investment casting

The casting precision, surface finish, material density, metallographic structure, mechanical properties and other aspects of sand mold castin...
28

2020-08

How should a foundry company choose a sand mixer

Sanzhuji combines more than ten years of experience to customize and produce various sand mixers, mainly divided into wet sand/green sand/green sand/clay sand (c...
21

2020-08

Sanzhuji exhibition was successfully concluded

Our company participated in the 16th China (Shanghai) International Foundry Exhibition in Shanghai from August 18 to 20, 2020. The scale of the entire exhibition area ...
17

2020-08

Clay sand treatment casting process

Clay sand casting is mostly green sand casting, the main components are sand, clay (bentonite), coal powder and water, and a few have he...
14

2020-08

Resin sand treatment casting production line

Resin sand casting production line is more and more popular because of the advantages of high dimensional precision and good surface finish. But the resin ...
10

2020-08

Lost sand casting (melting mold casting)

Part with the improvement of casting and precision casting, precision casting are melting casting, sand casting and investment casting compared with cla...
08

2020-08

Sand casting

Sanzhuji has been engaged in molding sand casting equipment for 11 years. We have summed up our experience in molding sand casting in the process of manufacture an...
03

2020-08

Sand casting automatic pouring machine

The loose sand particles in the molding sand casting process will enter the next key casting process, pouring, after being molded by the sand molding press of the mol...
30

2020-07

Sand mold press for sand casting

In recent years, with the improvement of the economic level and the increase of labor costs, the equipment in the foundry industry has been updated. On the one ...
27

2020-07

Vibration Shaking Type Sand Casting Separator

After the automatic pouring system finishes pouring, the castings are cooled and formed by the heat absorption of the sand. The formed castings follow the production line to the vibrating sand s...
20

2020-07

Porter of conveyor sand casting production line

A group of organic sand casting production lines will form an operation cycle. There are many important units in this cycle, such as sand mixers, reclaimers, shot blasting machines, etc., but if these...
14

2020-07

The core station of the sand mixer equipment production line of the sand mixer

If the recycling machine is the circulation point of the entire sand processing equipment production line, the sand mixing machine is its core station; whether it is a resin sand equipment production ...
08

2020-07

El sistema de presión negativa al vacío protege las piezas fundidas

It is well known that during the casting process, the temperature of the casting material is too high, which will cause the sand particles to expand, which may deform the casting and affect the ...
02

2020-07

Regulator for sand temperature of cooling bed

As the northern hemisphere enters summer, the rapid cooling of sand temperature during the casting process is an important part of old sand regeneration and reuse. The increase in natural const...
29

2020-06

Protective umbrella of magnetic separator sand treatment process production line

After the old sand is transported by the vibrating conveyor, it must go through a process of magnetic separation. The magnetic separation is mainly aimed at the found corner scraps left in the sand pa...
24

2020-06

On the importance of recycling machine to the whole production line of sand proc...

In the whole casting process, the reuse of old sand is indispensable. Regardless of whether it is the production cost or from the perspective of environmental protection, the recycling of old sand is ...
15

2020-06

Congratulations to Australia Xiti resin sand treatment process production line

This month, Australia has entered the winter. Qingdao Sancaster Equipment Manufacturing Co., Ltd. has produced resin sand treatment process production lines. Since th...

首页 3 4 5 6 7 8 9 <<>>

Web | App

Email:admin@sanzhuji.com

TEL：0086-532-88885868

Qingdao Sanzhuji Equipment Manufacturing Co.,Ltd
address：Huangdao District, Qingdao