It is a drum rotary cleaning equipment, which is composed of: 1, drum 2, drum door 3, drum bracket 4, shot blasting assembly 5, maintenance platform 6, elevator 7, separator 8, projectile control system 9, spiral Conveyor 10. Dust removal system 11. Feeding mechanism 12. Electric and pneumatic control system.

The following points of the tilt drum shot blasting machine:

1. A surface cleaning machine with high quality and efficiency, uniform cleaning products, high economy and simple operation.

2. The shot blasting chamber adopts a unique structure, which can clean general castings and forgings, even thin and small special parts can be processed without damage,

3. The company’s unique drum shaking structure is adopted. During shot blasting, the drum not only rotates but also shakes up and down, so the product in the drum is completely stirred to achieve a uniform cleaning effect. Due to the automatic and smooth movement, the workpiece will not be injured, and it can be gently and completely thrown in and discharged, which is convenient for operation.

4. The structure of the roller and the body is simple, so it can reduce the wearing parts and save the time and cost of maintenance.

Tips for using inclined drum shot blasting machine: The drum of the shot blasting machine is tilted to a certain angle with the horizontal direction, so that the workpiece to be cleaned can get the best tumbling and improve the cleaning quality. There is almost no gap between the guards of the drum, which can clean thin and small pieces . The design of the shot blasting machine takes into account the sound reduction measures to minimize the noise.

5. In order to reduce the noise of the shot blasting machine, the cylinder and the discharge door are equally divided into three layers. The inner layer is a wear-resistant protective plate, the middle is a soundproof rubber, and the outer layer is a general steel plate. The three are connected in series with bolts. The wear-resistant protective plate has a leaking hole, and the projectile flows out through the inner cavity to ensure the recurrence of the projectile.

6. The projectiles are removed by the vibrating screen to remove impurities, and the promotion machine is promoted to the BE type separator for separation and reuse. Castings are also transported by a uniform vibrating screen, because its vibration can sift out impurities and projectiles remaining in the casting cavities. The castings are cleaned. The screened projectiles are promoted by the promotion machine together with the mixed mainstream projectiles. The separator is separated and reused to make the casting The pellet machine has minimal loss of pellets.