It is suitable for surface cleaning or strengthening treatment of medium and small castings and forgings in locomotives, motors, casting, construction, machine tools and other industries. It is especially suitable for surface cleaning and shot blasting of multi-variety, small-batch castings, and steel structural parts to remove a small amount of sand core, sticky sand and oxide scale on the surface of the workpiece; suitable for slender, thin-walled parts that are not suitable for collision Clean up.

The hook-through shot blasting machine can be designed and manufactured according to the size of the shot blasting workpiece. The workpiece is cleaned by shot blasting at one time, which can not only remove the rust, welding slag, welding beans, oxide layer, impurities, dust, etc., on the surface of the workpiece, exposing the metal color, and at the same time make the polished surface, the machined surface and other surfaces form a uniform surface State and roughness. It can also eliminate the welding stress of the workpiece, improve the fatigue resistance of the workpiece, increase the adhesion of the paint film when the workpiece is painted, and finally improve the entire structure

The purpose of surface and inner quality.

The quality requirements for the shot blasting of the surface of the steel workpiece: the area coverage of the shot can reach 100%.

It can complete feeding, fast running to the front sealed chamber, frequency conversion speed and slow shot blasting cleaning, fast running to the rear sealed chamber, and the hook automatically returns to the feeding station through the track.

The layout of the shot blasting chamber and the shot blasting device are determined after the computer three-dimensional dynamic ejection simulation.

The electrical system is controlled by a "programmable controller" PLC. To

The hoist, separator, screw, and pulse detection device can realize automatic fault detection and alarm function. …

The secondary dust removal method is adopted to ensure the dust removal effect (settling chamber + pulse back-blowing bag filter). To

The main wearing parts are made with new precision casting technology to ensure the long-term use of wearing parts.