In the process of green sand casting, due to insufficient pressure of the vibration extrusion molding machine, the hardness of the sand mold is low, the workers ...

GS16-30 rotator mixer is mainly used in Green Sand Molding Line, equipped with 20T/H Green Sand Molding Line, this rotator mixer is the third time that the Egypt...

Sand casting is a casting method for producing castings in sand, and precision casting is a general term for obtaining precise castings with precise moldin...

Combining crushing regeneration and eddy current secondary regeneration can improve the surface cleanliness of furan resin regenerated sand.

Furan resin sand mixer adopts advanced gear pump and Italian diaphragm pump, the stirring cage is easy to open for inspection and maintenance, an ...

In the entire lost foam casting process, the pouring process is one of the most important links. The four factors of pouring system, pouring speed, pouring tempe...

Sanzhuji has signed a number of sand casting projects with Saudi Arabian foundries. The production line configuration for this case is a 20T/H green sand casting...

In the actual production process, most of the reclaimed sand is used. For the stability of casting quality, it is necessary to add a part of new sand to the recl...

The casting mold after flow coating operation has smooth surface, uniform coating thickness, dense and clear outline. After casting, the surface of the cas...

Green sand casting is the most economical and widely used casting method. 65%-70% of castings in industrialized countries are produced by green san...

The reduction of the ratio of sand to iron in furan resin sand casting depends not only on the design, but also on the implementation of the site. Sand and ...

The lost foam casting workshop uses lost foam negative pressure casting to produce the casting while grinding the lining plate with ordinary sand casting raw mat...

The double-arm continuous sand mixer is a multi-section cantilever structure, and the sand mixing tank and the boom have long axes of rotary motion, ...

Hydraulic multi-contact molding machine can obtain a large pressing force through the hydraulic cylinder. During compaction, each contact exerts corresponding pr...

This green sand molding machine is an Argentine project. The worktable size of Z143 is 560*465mm, which is mainly suitable for the casting production of smal...

hot sand cooling is the key problem that must be solved in the wet sand casting process. When the temperature of the reused sand is 50℃-70℃, the performance of...

The sand quality target of large foundry green sand processing system is reflected in the advanced and reliable technology of core process equipment. Such ...

Used sand regeneration is a dry mechanical regeneration process, which is suitable for the regeneration of used sand produced by castings with a certain producti...

The green sand recovery system adopts a three-stage tower series process layout to meet the foundry production lines supporting the sand processing department of...