Vibration boiling cooling device (configured with automatic temperature measurement and proportional humidification), its principle an&#...

The new GS25-132 high-efficiency rotor sand mixer has a structural design: the disc diameter is 2500mm, the total power is about 242kW, and the production ...

Sand molding machine is mainly suitable for Green Sand Molding Line. It is a semi-automatic molding equipment. It is used in pairs. Sand molds are made by vibrat...

There are many factors that affect the quality of furan resin no-bake sand, such as the properties of raw sand and reclaimed sand, the t...

In recent years, Sanzhuji mainly produces rotor-type sand mixers according to the characteristics of green sand mixing. Efficient rotor-type sand mixers can grea...

It is a high temperature resistance furnace heating method mainly realized by sand treatment equipment and core sand regeneration equipment. These include:...

The coated sand can be used to make both casting molds and sand cores. The molds or cores of the coated sand can be used together with other sand molds (co...

The main factors affecting the wear of shot blasting machine accessories are accessories material, working load, movement speed, temperature, ...

Excessive sand temperature increases the production cost of green sand casting and affects the quality of the castings

Whether it is green sand casting or furan resin self-hardening sand casting, waste sand will be produced. Although the sand recycling equipment can recycle the o...

The complete green sand casting production line is mainly divided into: core shooting machine, molding equipment, molding sand conveying equipment, casting equip...

The production line adopts ZXJ4555 horizontal boxless molding machine, GS1416 rotor sand mixer, S4310 fine hexagonal screen, S99 suspended permanent magnet separ...

Lost foam casting requires negative pressure technology, mainly using water ring vacuum pump to achieve negative pressure effect, this method has low cost an ...

According to the degree of automation, the production line of Jolt-squeezing moulding machines can be divided into semi-automatic casting production line and...

Lost foam casting technology is a new type of practical casting technology that combines lost foam casting technology and suspension casting.

The process equipment for foundry sand processing is generally divided into: process equipment, conveying equipment, auxiliary equipment, dust removal equipment,...

Box closing and casting are the key processes to obtain complete castings. During the box closing process, it is necessary to ensure that the sand tires ar...

Lost foam casting is also called lost wax casting. The white foam model is wrapped with a special material, and the foam model is covered with silica sand ...

Through the observation of the production practice of Sanzhuji combined with the foundry, all parts from the sprue cup, sprue, cross runner, inner runner to the ...

This project is a foundry laboratory project in South Africa, equipped with medium frequency induction heating electric furnace and cooling tower, S24 furan resin sand mixer, S11 gre...